The hair dye is actually a foam, and it’s one of the more complicated ways to create an effect on top of a foam.
It’s a tricky process.
It requires you to take the foam and create a pattern using your own foam, then spray it on top, or add it to a base of foam.
The pattern can be something as simple as using a brush to paint a colour on a base foam, or as elaborate as using an existing base foam and painting a texture onto it.
The foam you use needs to be fairly rigid.
It can’t be too soft, and should be able to hold its shape and allow it to absorb colour without it being too soft.
If the foam isn’t quite rigid enough, you’ll need to add more foam to the base, which can be tricky.
You’ll also need to use a spray bottle or something similar, and mix the colour with a small amount of hair dye.
This will give the colour a more opaque effect.
Then you’ll have to add a base colour, and paint it over the base.
Once it’s painted over, you can add some water, and spray it onto the foam, to make the effect more apparent.
You can also add water to the foam before adding the colour, to add some colour to the finished result.
You can even add some spray paint to the surface and then spray the foam over the colour as it dries.
The colour will fade, and will be more visible in the final product.
You’re not just spraying foam, you’re also using a base paintbrush and a brush.
The paintbrush needs to have some level of finesse to apply the colour.
You’ll want to be able a brush or a paintbrush to apply colours to your foam.
In a way, this technique is a lot easier to apply with a paint brush, but it still requires a lot of finescent strokes to apply colour to foam, so you might want to have a friend or relative help with the colour application.
When you add a foam to your top, you also need a base coat of base colour on top.
This base colour is the colour that will make the foam stand out, and which will then be added to the paintbrush.
Here’s what the foam should look like on the foam base:Now you’re ready to go!
The key here is to make sure the foam is stiff enough to hold the shape of the foam.
If it’s too soft it will crack, and the foam will fall off.
If you paint the foam with too much colour it will get on the colour and look blurry.
Once you’ve created the foam shape, you need to paint the colour onto it using a flat brush.
You need to do this with a clean white basecoat.
This can be a white base coat or a white paint with a dark grey colour.
The colours should be pretty consistent, and you should avoid mixing colours together.
You may want to add another base coat to the white base to get more consistent colour.
You’ll want the foam to be slightly tacky, but not too so that it will hold its colour.
When you’re finished, you should be left with a glossy foam, which will look like this: I hope you enjoyed this tutorial.
Have a look around, and if you have any questions, feel free to comment below.
Image credit: Flickr user Jannes K.